MicroPoly® Standard Solid Profiles
MicroPoly Lubricants are solid, and can be processed into a variety of shapes with various polymer processing techniques.
Typical Applications for MicroPoly Solid Profiles:
Standard MicroPoly Solid Profiles
| Nominal Diameter | Cross-section | Nominal Size | Cross-section | |
|---|---|---|---|---|
| 3.3" | round | 3/4" | square | |
| 2.35" | round | 1/8" | square | |
| 1" | round | 1.25" x 2"—6" | square | |
| 3/4" | round | 1" x 2" | rectangle | |
| 5/8" | round | 1 11/16" x 3/4" | rectangle | |
| 1/2" | round | 3/4" x 1 3/4" | rectangle | |
| 5/16" | round | 0.061” x 2.6" | rectangle | |
| 1/4" | round | 0.18" x 3.0" | rectangle | |
| 20 mm | round | 1/2" x 4" | rectangle | |
| 13 mm | round | 1" x 4" | rectangle | |
| 9 mm | round | 1/2" top, 1/2" high, 3/4" base | trapezoid | |
| 5 mm | round |
Profiles are available in a variety of lengths. Minimum order quantities may apply.
These profiles are available in MicroPoly formulas: MPI-0779, MPI-0800, MPF-0696
MicroPoly® Custom Profiles
MicroPoly solid profiles can be custom-made for specific lubrication applications. Some examples shown below are profiles that were extruded and cut to length; others were machined to customer specifications; and some were punched from MicroPoly sheets. Many of the applications have replaced felt based lubricators. MicroPoly eliminates the need for re-oiling and spillage that can occur with conventional lubrication systems.
Our Engineering Staff can work with you to design specific profiles to meet your lubrication needs.
Typical Applications for MicroPoly Custom Profiles:
- Ball bushings
- Ball screws
- Clutch bearing lubrication
- Gear lubrication
- Linear bearings
- MicroPoly washers
